Do cabinets come with your kits?

The prices listed do not include cabinets but we can supply  them upon request for the RC3R, Tanzanite, 35F, Sardonyx, 35CC, Hiddenite, and SSR. These are pre-finished and all you need to do is cut the openings for the drivers and ports (where applicable), add the drivers, and install the crossovers / damping material. In some cases you'll need to cut and install additional bracing for the enclosure. The baffles are glued and screwed to the main cabinet so final assembly is very easy.  For  an additional charge we can cut the baffles for you - feel free to ask for a quote.

What's included with the kit?

Drivers, assembled crossovers (with internal wiring), connectors, terminal cups / binding posts, gasket tape, screws, cabinet plans, and shipping costs. The ported designs also come with port tubes and foam sheets for internal damping. We also provide free unlimited support via email or phone.

What's the difference between the standard and deluxe crossovers?

Our standard crossovers include Solen polypropylene capacitors (values less than 100 mfd for the 35CC), Mundorf metal oxide resistors, air core inductors, and steel laminate 15awg inductors (values greater than 4mh). The deluxe crossovers use Clarity Cap, Auricap, or Mundorf capacitors in the tweeter and midrange sections. In some of the 3-way designs these are also implemented in the woofer portion of the crossover. The inductors are Goertz 16awg copper foil coils in places where the d.c. resistance  is acceptable to maintain the optimal transfer function of the driver response.  All resistors in the deluxe crossovers are Mills MRA-12 1% tolerance parts.

Upon request we can implement specific brands of parts; however, the design may not allow for specific components because of circuit optimization and /or space constraints. We can advise you concerning what will work best for your system.